FANN EkoTreat Max WiFi – Installation instructions
3
Installation
The unit should be installed by a qualified professional
in accordance with applicable industry regulations in
order to avoid any water damage. Installation that does
not meet the requirements in terms of electrical or water
connection requirements could lead to danger of death or
water damage. Suitable connection points can be under
the sink, in the laundry room or any other location within
one metre of water, drainage and power points. A power
socket, drainage connection and water connection point,
such as a sanitary ball valve, should be within one metre of
the flocculant unit.
The pressure from the water pipe must not exceed 8 bar.
Mount the unit on the wall with the connections down-
wards. The distance from the under edge of the unit to the
bottom of the drum with flocculant should be 110-130 cm
(see figure 1)
. Avoid using long bolts that could damage
anything outside of the cabinet that the unit is mounted in.
Connect the mixer to the drainage system with a suitable
connection. The external diameter of the mixer is 32 mm
and fits couplings designed for 32 mm drainage pipes. A
32-50 mm coupling is included and can be used if required.
You can install the mixer below the dosing unit or in line
with the upper edge of the unit
(see image 2)
.
You do not need to have gravity drainage from the unit
to the mixer. The mixer must NOT be connected in above
the water trap (
see figure 3
). The mixer must NOT be
connected to the drainage pipe that runs to the floor drain.
Figure 1
Figure 2
Figure 3
1.1 - 1.3 m
Technical description
At pre-set times of the day, the unit dispenses an amount
of flocculant that corresponds to the number of people the
unit is set to.
Dimensions of the Ekotreat WiFi
16 x 24 x 10 cm (HxBxD), weight 2.1 kg.
Water connection
½ inch internal thread.
Drain connection
32 mm plug for connection to drainage pipe. Internal
18 mm. Use the 32-50 mm coupling supplied if necessary.
Power adapter
INPUT: AC 100-240 V 50/60Hz 450 mA.
OUTPUT: 24 VDC 1000 mA.
The dosing unit enclosure is made of ABS plastic with an
IP53 rating. Do not install the unit where it will be exposed
to direct sunlight. Do not install the unit in areas with
constantly elevated humidity levels. The temperature
should be b16 and +25°C
Dimensions of container for Ekotreat flocculant:
Height 64 cm, Width 34cm, Depth 40 cm. Volume 60 L.
Height 94 cm, Diameter 60 cm. Volume 200 L.
