background image

•  Attach the wheels to the bottom of the water tank. Install the wheels with brakes 

on the same side.

• 

Position the appliance so it stands upright & is on a firm surface.

•  Fill the tank with clean water (bore or hard water is not recommended) 

via the manual inlet on the front.

•  Connect the plug to the relevant power source.

•  The appliance will be in standby mode & will display the ambient temperature.

• 

Press the ON/OFF        button  & hold for 2s to turn on or off, or press         on the 

remote control. The appliance will turn back onto the last setting.

•  Press       to select cooling or ventilation mode. 

1) Cooling mode: the water pump will turn on and the fan indicator light will flash. 

The Wind Speed & Swing indicator lights will display based on previous settings. 

An alarm will sound for 10 seconds, then the fan will start (fan indicator light will 

rotate). 

Water shortage

 - the water pump will cutout after 30 seconds if it cannot 

detect anyway water in the tank and the water shortage indicator light will flicker 

and the alarm will sound. The alarm will go off every minute for 5 minutes. After 

adding water, the water shortage indicator light will turn off and the water pump 

will work in 30 seconds. 

2) Ventilation mode: Press       , the cooling mode & water shortage inidcator 

lights will be off, and the water pump will shutdown/

• 

To adjust the wind speed (fan), press       and every time you press it will increase 

the speed 1-2-3-4-5-6-7-8-9, then press to descrease 9-8-7-6-5-4-3-2-1              .

• 

To turn on the Swing function, press      (swings left to right).

•  Press        to set auto shutdown or manual lock of the control panel. Set the timer 

to shutdown between 1 or 8 hours (0 means cancel auto shutdown), when the 

machine is running. The count down and temperature will display.

•  Press          to lock/unlock the control panel. 

•          Auto temperature adjust mode and natural mode; Press once to select 

natual mode, press twice to enter Auto Temperature, third touch will return to 

manual adjust mode.

4. OPERATING INSTRUCTIONS

3.  GETTING TO KNOW YOUR APPLIANCE - CONT

Remove the appliance from the carton. If the appliance is damaged, please 

contact Fanmaster or where you purchased the appliance from.

Содержание OUBER PAC125-ADC

















Отзывы: