FanJu FJ3378, Руководство пользователя

Страница: 17 / 23

FJ3378-DCF Manual
16
2 INITIAL OPERATION AND NOTES
2.1 Initial Operation

Open the weather station battery compartment, insert 2 x AA batteries observing polarity [ “+” and “ –“ marks]

Remove the battery compartment on the Wireless Remote Sensor, insert 2 x AA batteries observing the correct
polarity (+ and - marks) and close the battery compartment.

When the power is connected all the icons on the LCD display will light up for 3 seconds, you will hear a beep tone
and the weather station will start to detect the indoor temperature and humidity

The weather station will start to make a c onnection to the outdoor remote sensor. This operation takes about 3
minutes and is displayed by a flashing reception RF icon “
”
in the “Remote Sensor” display area on the receiver.

Once the weather station has created a connection to the outdoor sensor the clock will start automatically searching
for the DCF Signal to set the time and date. The radio mast icon “ ” will flash showing it is searching for signal, it may
take up to 7 minutes to search.
2.2 Notes for Customer before Use

During the DCF signal search mode only the “ ” and “ ▲ ” button will function, all other buttons have no function.
And backlight will not keep lighting during this moment even if the adapter plug in. Press the “ ▲ ” button it can cancel
the DCF signal search and all buttons and backlight will function.

If weather station failed to receive transmission from outdoor sensor (“
- -
”display on the main station LCD), press and
hold “▼” button for 3 seconds to receive transmission manually. RF icon “ ” flashes on the LCD and the weather
station to re-receive the data from outdoor sensor. Or open the sensor battery compartment, press the TX button to
connect the sensor and station again.
3 TIME, TIME ZONE AND CALENDAR SETTING
3.1 Manual Time Setting

Press once “ ” button, can switch the display calendar or second

Press and hold down the “ ” button for 3 seconds, the 12/24 hour mode display starts to flash. Now use“
▲
” and
“▼” buttons to set the correct 12/24 hour mode.

Press “ ” to confirm your setting, the Time Zones starts to flash. Now use “ ▲ ” and “▼” buttons set a correct time
zone (-12 to +12).

Press “ ” to confirm your setting, the Hour display starts to flash. Now use “ ▲ ” and “▼” buttons to set the correct
hour.

Press “ ” to confirm your setting, the Minute displays starts to flash. Now use“ ▲ ” and “▼” buttons to set the correct
minute.

Press “ ” button to confirm your setting, the Month and Date icon display starts to flash. Now use “ ▲ ” and “▼”
buttons to set the date display on Month/Date or Date/Month.

Press “ ” button to confirm your setting, the Year display starts to flash. Now use “
▲
” and “▼” buttons to set the
correct year.

Press “ ” button to confirm your setting, the Month display starts to flash. Now use “ ▲ ” and “▼” buttons to set the