Assembling Fan With the Light Kit
12
1.
Disassemble the adapter/switch cup assembly from
the switch cup support plate by removing three
screws. (Figure 21)
3.
Connect the 2-pin connector from motor assembly
4.
Assemble the adapter/switch cup assembly onto
the assembled switch cup support plate with three
screws. (Figure 24)
to the 2-pin connector from the adapter/switch cup
assembly. (Figure 23)
Figure 23
Figure 21
Figure 22
2.
Remove one of the three screws in the support
bracket at the bottom of the motor assembly.
Slightly loosen the remaining two screws. Assemble
the switch cup support plate to the support bracket
using the two key slots in the socket plate. Replace
the third screw and securely tighten all three screws
(Figure 22).
Figure 24
Switch cup support
plate
Switch cup
support plate
Adapter/Switch cup
assembly
NOTE:
If you are assembling your fan without the light kit, please skip to page 14 of this manual.
