Fanimation TF9070TS Скачать руководство пользователя страница 4

4

Electrical and Structural Requirements

Your new ceiling fan will require a grounded electrical 
supply line of 120 volts AC, 60 Hz, 15 amp circuit.  The 
outlet box must be securely anchored and capable of 
withstanding a load of at least 50 lbs.  

Figure 1

 depicts 

different structural configurations that may be used for 
mounting the outlet box.

Ceiling

Ceiling

Joists

2

˝

 x 4

˝

Outlet

Box

Figure 1

WARNING

To avoid fire or shock, follow all wiring instructions 

carefully.  Any electrical work not described in these 

instructions should be done or approved by a licensed 

electrician.

If your fan is to replace an existing light fixture, turn 
electricity off at the main fuse box at this time and remove 
the existing light fixture.

WARNING

Turning off wall switch is not sufficent.  To avoid 

possible electrical shock, be sure electricity is turned 

off at the main fuse box before wiring.  All wiring must 

be in accordance with National and Local codes and the 

ceiling fan must be properly grounded as a precaution 

against possible electrical shock.

WARNING

To reduce the risk of fire, electrical shock, or personal 

injury, mount fan to outlet box marked acceptable 

for fan support of 22.7 kg (50 lbs) or less. Use screws 

supplied with outlet box.  Most outlet boxes commonly 

used for support of light fixtures are not acceptable for 

fan support and may need to be replaced.  Consult a 

qualified electrician if in doubt.

Energy Ef

fi

 cient Use of Ceiling Fans

Ceiling fan performance and energy savings rely 
heavily on the proper installation and use of the ceiling 
fan.  Here are a few tips to ensure efficient product 
performance.

Choosing the Appropriate Mounting Location

Ceiling fans should be installed, or mounted, in the middle 
of the room and at least 7 feet above the floor and 18 
inches from the walls. If ceiling height allows, install the fan 
8 - 9 feet above the floor for optimal airflow. Consult your 
Fanimation Retailer for optional mounting accessories.

Turn Off When Not in the Room

Ceiling fans cool people, not rooms. If the room is 
unoccupied, turn off the ceiling fan to save energy.

Using the Ceiling Fan Year Round
Summer Season:

 Use the ceiling fan in the counter-

clockwise direction.  The airflow produced by the ceiling 
fan creates a wind-chill effect, making you “feel” cooler. 
Select a fan speed that provides a comfortable breeze, 
lower speeds consume less energy.

Winter Season:

 Reverse the motor and operate the ceiling 

fan at low speed in the clockwise direction. This produces 
a gentle updraft, which forces warm air near the ceiling 
down into the occupied space.Remember to adjust your 
thermostat when using your ceiling fan - additional energy 
and dollar savings could be realized with this simple step!

Содержание TF9070TS















Отзывы: