1.
Remove one of the three screws in the adaptor
plate at the bottom of the motor assembly. Slightly
loosen the remaining two screws. Assemble the light
plate assembly to the adaptor plate of the motor
assembly using the two key slots in the light plate
assembly. Replace the third screw and secure all
three screws. (Figure 1)
Figure 1
Light Plate
Assembly
Motor
Assembly
How to Assemble Your Light Kit or Cap
2.
Remove one of the three screws in the light plate
assembly and retain the screw for later. Slightly
loosen the remaining two screws. (Figure 2)
Figure 2
Light Plate
Assembly
13
Connect the 2 single pin connectors from the LED
assembly to the 2 single pin connectors from motor
assembly. (Figure 4A)
To reduce the risk of electric shock, disconnect the
electrical supply circult to the fan before installing
light kit.
CAUTION
4B. (Option B--for use with steel cap)
If you want to install the steel cap and not the light kit.
3. If you want to install the
light kit, skip this step
.
Assemble the light kit wire cover to the light plate
assembly using the two key slots. Replace the
removed screw in Step 2 and secure all three screws.
(Figure 3)
Assemble the steel cap to the light
kit
assembly by
twisting in a clockwise direction. (Figure 4B)
NOTE:
If you have installed your fan with the steel
cap, skip Steps 5 and 6.
4A. (Option A--for use with light kit)
Light Kit
Wire Cover
Figure 4A
Figure 4B
LED
Assembly
Steel Cap
Light Plate
Assembly
Figure 3
