How to Assemble the Blades and Light Kit
x 15
x 15
FIBER WASHER
3/16˝-24
WASHER HEAD
SCREWS
1.
Position the blade over the blade holder with
threaded posts showing. Make sure the bottom
edge of the blade is fully seated against the blade
holder. With a Phillips screwdriver, tighten 3/16˝-24
washer head screws and fiber washers to secure
the blade to the blade holder. (Figure 1)
Do not connect fan blades until the fan is completely
installed. Installing the fan with blades assembled
may result in damage to the fan blades.
CAUTION
x 10
1/4˝-20
SCREWS
NOTE:
Periodically check blade holder hardware
and resecure if necessary.
2.
Secure the blade holders to the motor assembly
using the 1/4˝-20 screws. (Figure 2)
To reduce the risk of personal injury, do not bend the
blade holders when installing, balancing the blades
or cleaning the fan. Do not insert foreign objects in
between the rotating blades.
WARNING
!
How to Install Your Canopy Housing
2.
Securely attach and tighten the canopy screw
cover over the shoulder screws in the hanger bracket
utilizing the keyslot twist-lock feature. (
Figure
2)
WARNING
To avoid possible fire or shock, make sure that the
electrical wires are completely inside the canopy
housing and not pinched between the housing and the
ceiling.
NOTE: This step is applicable after the neccessary wiring is
completed.
Canopy Screw
Cover
Figure 2
Ceiling Canopy
Figure 1
Motor
Assembly
Blade Holder
Figure 2
Figure 1
Blade
Blade Holder
12
3/16˝-24 Washer Head Screws
and Fiber Washer
(3 each per blade)
1/4˝-20 Screws
(2 per assembly)
1.
Assemble canopy by rotating key slot in canopy
over shoulder screw in hanger bracket, taking care
not to pinch the wires. Tighten shoulder screw. Fully
assemble and tighten second shoulder screw that
was previously removed. (Figure 1)
HARDWARE USED:
HARDWARE USED: