Figure 3
Wires
Set Screws
and Nuts (2)
Downrod
9
How to Assemble Your Ceiling Fan
3.
Loosen the two set screws and locking nuts in the
downrod support of the motor assembly. Route
the wires through the downrod.
(Figure 3)
Figure 1
Hanger
Ball
Pin
Set screw
Downrod
1
.
Remove the hanger ball portion from the downrod/
hanger ball assembly by loosening the set screw in the
hanger ball until the ball falls freely down the downrod.
Remove the pin from the downrod, then remove the
hanger ball. Retain the pin and hanger ball for
reinstallation in Step 6. (Figure 1)
Hairpin Clip
Clevis Pin
Figure 2
2.
Remove the hairpin clip and clevis pin from the
bottom of the downrod. Retain the pin and clip for
reinstallation in Step 4. (Figure 2)