13
How to Wire Your Ceiling Fan (Continued)
Listed Outlet Box
White Wire
from Supply
Green Wire
from Supply
(Ground)
Household
Supply
Black Wire
from Supply
Black Wire
from Receiver
White Wire
from Receiver
Green Wire
from Hanger
Bracket (Ground)
Green Wire
from Hanger
Ball (Ground)
Green Wire
from Receiver (2)
(Ground)
Receiver
Figure 5
Red Wire
from Supply
WARNING
The blades must be installed first before programming
is performed.
4.
After connections have been made, put the
white and green leads to one side and the black
leads towards the other side, the connection
should be turned upward and carefully push leads
into the outlet box. The wires should be spread
apart with the grounded conductor and the
equipment-grounding conductor on one side of
the outlet box and the ungrounded conductor on
the other side. (Figure 5)
3.
Connect wires using connectors as shown in Figure 4.
Connect the 2 pin connectors from the motor assembly
to the 2 pin connectors from receiver, connect the 3 pin
connectors from the motor assembly to the 3 pin
connectors from receiver.
CAUTION:
INCORRECT WIRE CONNECTION
COULD DAMAGE THIS RECEIVER.
RECEIVER HARDWARE USED:
X 4
Wire Connectors
Check to see that all connections are tight,
including ground, and that no bare wire is
visible at the wire connectors. Do not operate
fan until the blades are in place. Noise and
motor damage could result.
WARNING
Figure 4
RF ANTENNA
RECEIVER
BLACK
WHITE
L
N
AC POWER
BLUE
WHITE
LIGHT KIT
YELLOW / GREEN
(2)
GROUND
HANGER
BRACKET
HANGER
BALL
DC MOTOR
RED
L1
YELLOW
RED
GRAY
BROWN
BLUE
BROWN
BLUE
RED
GRAY
YELLOW
WHITE
BL
A
CK
Plug connector from motor
Receptacle connector from receiver