Fanimation Multimax FP8008CH, Руководство пользователя

Страница: 4 / 9

7. Upper Housing & Downrod Assembly
(1)
Feed motor lead wires and safety cable
through Upper Housing,Deco Ring, Canopy
and downrod and insert downrod into yoke.
Upper Housing
Downrod
Wires & safety cable
Yoke
Cotter Pin
Cross Pin
(2)
Insert the cross pin through Yoke & Downrod and
secure with Cotter Pin.
(3)
Tighten both Downrod Set Screws to further
secure Downrod, then pull down the Upper
Housing to cover wiring Pan.
Downrod Set Screw
Yoke
Cotter Pin
(4)
Attach Upper Housing to brackets on Wiring Pan.
Align rectangular hole with reversing switch, and
secure with 2 screws provided from hardware bag.
8. Hanging the fan
Mounting
Bracket
(1)
Lift fan assembly onto mounting bracket.
(2)
Rotate fan so that the groove on the ball engages
the ridge in the mounting bracket.
P3
Deco Ring
Deco Ring
(3)
Ridge
Ball Groove
Mounting
Bracket
Safety cable
Canopy
Attach the safety cable to ceiling support cable. Slide cable
clamp onto safety cable (from fan). Place the end of cable
through the loop of ceiling support cable. Pull as much cable
through loop as possible. Feed end of cable into clamp hole
and firmly tighten screw. Cut off excess safety cable.
Safety Cable
Ceiling Support
Cable
Screw
Screws
Yoke cover
Screws
Reversing
Switch
Cable Clamp