Canopy
Fan assembly
Blades
Mounting Bracket
Downrod
1.Unpack and inspect fan carefully to be certain all contents are
included.
OFF OFF OFF
Turn off power at breaker
box to avoid possible
electrical shock.
Use metal outlet box
suitable for fan support.
Secure outlet box directly to
the building structure using
wood screws (included).
Outlet box must support
50 lbs min.
2.
3.
Glass
6. Blade installation
Deco Ring
Deco Cap
Upper Housing
Hardware bag
P2
Remote Control
Gu24 Bulb x 2
Blade Screw w/Washer 9pcs
Nylon Washer
9pcs
Mounting Screw
2pcs
Spring Washer
2pcs
Lock Washer
2pcs
Wood Screw
2pcs
Star Washer
2pcs
Blade Balance Kit
1pc
Wire Nuts
4pcs
Upper Housing Screw
2pcs
Safety Cable Bag
1pc
5.
Outlet Box
Mounting
Bracket
Screw
Blade
Nylon Washer
4.
To attach ceiling support cable, drill a ¼ in. pilot
hole, located independently from the junction
box, into the ceiling joist or structural member.
Securely attach the ceiling support cable with
3⁄
8 in. x 2 in. lag bolt and flat washer.
MUST be able to fully support at least 100 lbs.
Install mounting
bracket to Outlet box
in ceiling using washers
and the mounting
screws provided with
the outlet box.
Do not use
existing
mounting
bracket,
replace it with
new mounting
bracket from
box.
Attach blades to fly wheel
with blade screws and nylon
washers provided in the
hardware bag. Make sure
blade numbers (2, 3 or 4
Blades) correspond with
figures shown on flywheel.
Screw Driver
Содержание Multimax FP8008CH
Страница 2: ......
