9
Mounting the Fan Blades
1.
Attach blades to the motor hub using the provided
washer head screws and fiber washers.
Make sure the
screws securing the blades to the motor hub are tight and
are properly seated. Do not overtighten.
(Figures 1 & 2)
Figure 2
Fan Blade
Washer-head
Screw with
fi
ber washer
(3 per blade)
Figure 1
Installing the Downrod Cover Clip
INSTALLATION NOTE
Do not connect fan blades until the fan is completely
installed. Installing the fan with blades assembled may
result in damage to the fan blades.
▲
WARNING
To reduce the risk of personal injury, do not bend the
blades when installing, balancing the blades or cleaning
the fan. Do not insert foreign objects in between the
rotating blades.
1.
After hanging the fan, slide the Square Motor Coupling Cover
and Square Sleeve upward to install the Downrod Cover Clip.
(Figure 1)
NOTE:
The clip must be properly installed as described in Step
1, or square sleeve will not seat properly.
2.
Slide the Square Motor Coupling Cover and Square Sleeve
down as shown. (Figure 2)
Figure 1
Detail of Clip
Figure 2
Downrod
Cover
Clip
