Fanimation KLEAR FPD6858 Series, Руководство пользователя, Страница: 9 / 68

5. Route wires through motor coupling cover, canopy
screw cover and ceiling canopy. (Figure 5)
7. Remove one of the two shoulder screws in the
hanger bracket and retain the screw for later. Loosen
the second shoulder screw without fully removing it.
(Figure 7)
How to Assemble Your Ceiling Fan (Continued)
9
Canopy Screw
Cover
Ceiling Canopy
Motor Coupling
Cover
Figure 5
Hanger Bracket
Figure 7
Figure 6
6. Reinstall the hanger ball on the downrod as follows.
Route the wires through the hanger ball. Position the
pin through the two holes in the downrod and align the
hanger ball so the pin is captured in the groove in the
top of the hanger ball. Pull the hanger ball up tight
against the pin. Securely tighten the set screw in the
hanger ball. A loose set screw could create fan
wobble. (Figure 6)
CAUTION
All set screws must be checked, and retightened where
necessary before installation.