Fanimation KLEAR FPD6858 Series, Руководство пользователя, Страница: 14 / 68

14
How to Assemble Your Light Kit or Cap
Figure 1
Figure 2
Figure 4
Figure 3 Figure 3
1. Remove one of the three screws in the support
bracket at the bottom of the motor assembly and
retain the screw for later. Slightly loosen the
remaining two screws. (Figure 1)
To Reduce The Risk Of Electric Shock, Disconnect
The Electrical Supply Circuit To The Fan Before
Installing Light Kit.
CAUTION
Motor
Assembly
2. Assemble the switch housing assembly to the
support bracket using the two key slots in the
switch housing assembly. Replace the previously
removed screw and securely tighten all three screws.
(Figure 2)
3. Remove the three screws in the switch housing
assembly and retain the screws for later. (Figure 3)
Switch Housing
Assembly
Switch Housing
Assembly
Switch Housing
Assembly
4. If installing the light kit, skip this step.
Assemble the light kit wire cover to the switch housing
assembly using the removed screws in step 3 and
secure all three screws. (Figure 4)
Light Kit Wire Cover