How to Assemble the Ceiling Fan Blades and Cap
x 9
x 3
BLADE PLATE
SERRATED HEAD
SCREWS
HARDWARE USED:
1.
Position hole of blade align the post on the motor
assembly flywheel. Make sure the blade is fully seated
against the flywheel. Place blade plate over the blade
with holes aligned and assemble blade to flywheel using
serrated head screws, but don't fully tighten. (Figure 1)
2.
Assemble the lower blade plate to the blade by aligning
holes of the lower blade plate with the blade holes on the
bottom of the fan and using the tapping screws.
(Figure 2)
3.
Fully tighten the screws that attach the blades to the
motor assembly flywheel. (Figure 3)
4.
Attach the plastic cap assembly to the blade.
Cap is held in place by a magnet. (Figure 4)
#10-32
8
HARDWARE USED:
Plastic Cap Assembly
x 6
M4 TAPPING
SCREWS
Figure 4
M4 Tapping Screws
(2 each per blade)
Lower Blade Plate
Figure 2
Figure 3
#10-32
Serrated Head Screws
Blade
#10-32
Serrated Head Screws
(3 each per blade)
Blade
Figure 1
Blade Plate
Motor
Assembly
Blade
Post
