Electrical and Structural Requirements
ELECTRICAL REQUIREMENTS
Table / Wall fan requires a grounded electrical supply line
of 120 volts AC, 60 Hz, 15 amp circuit. 8 ft power cord
included. NOT for Damp Location Use.
To avoid fire or shock, follow all wiring instructions
carefully. Any electrical work not described in these
instructions should be done or approved by a licensed
electrician.
WARNING
WARNING
To Avoid Fire Or Electrical Shock, Do NOT Use This Fan
With Any Solid-State Speed Control Device And Do NOT
Use By Open Window.
How to Assemble Your Floor Fan
Motor Assembly
Leg
1.
Assemble the leg to the motor assembly with
3/16˝-24 x 1/2˝ screws. Make sure all screws securing
tight the leg with motor assembly using the supplied
“T” wrench. (Figure 1)
2.
Assemble the cap rubber on to the screw of the leg.
(Figure 2)
x 12
3/16"-24 x 1/2"
Cap Head With
Spring Washer
HARDWARE USED:
x 12
Cap Rubber
HARDWARE USED:
Cap Rubber
Figure 1
Figure 2
5