Fanimation Enigma FP2120 Series Скачать руководство пользователя страница 3

3

This Manual is Designed to Make it as Easy as Possible for You

to Assemble, Install, Operate, and Maintain Your Ceiling Fan

Unpacking Instructions

For your convenience, check-off each step.  As each step is completed, place a check mark.  This will ensure that all 
steps have been completed and will be helpful in 

fi

 nding your place should you be interrupted. 

Wiring outlet box and box connectors must be of type re-

quired by local code.  The minimum wire would be a 3-con-

ductor (2-wire with ground) of the following size:

NOTE:

  Place the parts from the loose parts bags in a 

small container to keep them from being lost.  If any parts 

are missing, contact your local retailer.

Tools Needed for Assembly

Materials

 One Phillips head screwdriver

 One stepladder

 One ¼

˝

 blade screwdriver

 

9

16

˝

 Socket head wrench

 One wire stripper

Wire Size A.W.G.

Installed Wire Length

14

12

Up to 50 ft.

50 - 100 ft.

NOTE:

  If you are uncertain of part description, refer to

exploded view illustration. (Figure 1, page 11)

Check to see that you have received the following parts: 

• Hardware bag:

      – Four wire connectors

      – Two 

5

/

32

˝

 threaded rods

      – Two 

5

/

32

˝

 lockwashers

      – Two 

5

/

32

˝

 knurled knobs

• Support Cable bag:

      – Ceiling Support Cable

      – Cable Clamp

      – 

˝

 x 2

˝

 lag bolt

      – 

˝

 

fl

 at washer

• Lower Cover Assembly

• Lower Cap

• C4 Fan & Light Remote Control

• Remote Receiver Unit

Downrod/

Hanger Ball 

Assembly

Hanger 

Bracket

Lower Cover 

Assembly

Ceiling Fan

Assembly

Hardware Bag

Ceiling Canopy

Remote

Receiver

Unit

C4 Remote

Control

• Ceiling Fan assembly

• Downrod/Hanger Ball assembly

• Ceiling Canopy

• Hanger Bracket

• Motor Coupling Cover

Motor Coupling

Cover

WARNING

Do not install or use fan if any part is damaged or 

missing.  This product is designed to use only those 

parts supplied with this product and/or any accessories 

designated specifically for use with this product by 

Fanimation.  Substitution of parts or accessories not 

designated for use with this product by Fanimation could 

result in personal injury or property damage.  Contact 

your retail store for missing or damaged parts.

WARNING

Before assembling your ceiling fan, refer to section on 

proper method of wiring your fan (page 4).  If you feel you 

do not have enough wiring knowledge or experience, 

have your fan installed by a licensed electrician.

Lower Cap

NOTE:

 The illustration shown is not to scale or its actual con

fi

 guration may vary.

Wires partially removed for clarity.

Содержание Enigma FP2120 Series













Отзывы: