How to Assemble Your Light Kit or Cap (continued)
14
Figure 9
8. For use with steel cap (B).
Assemble the light wire cap to the light kit using the
provided screws and secure all four screws.
(Figure 8)
7. For use with steel cap (A).
Remove the LED assembly from LED kit by remove the
three screws. (Figure 7)
Light Kit
Light Kit
Light Wire Cap
Steel Cap
Figure 6
Figure 8
Figure 5
Figure 7
Glass
9. For use with steel cap (C).
Assemble the steel cap to the light
kit
by twisting in a
clockwise direction. (Figure 9)
NOTE:
If you have installed your fan with the light kit,
skip as below Steps.
6.
For use with light kit (C).
Secure the glass to light kit by twisting in a
clockwise direction. Do not over-tighten. (Figure 6)
5. For use with light kit (B).
Assemble the LED kit to the light plate assembly using
the
removed screws in Step 5
and secure all three
screws. (Figure 5)
The light source is designed for this specific
application and can overheat if serviced by untrained
personnel. If any servicing is required, the product
should be returned to an authorized service facility
for examination or repair.
CAUTION
LED Assembly
Light Plate
Assembly
LED Kit
Light Kit
LED Kit
