11
How to Assemble the Blades and Light Kit (continued)
MOTOR ASSEMBLY
2-PIN CONNECTOR
SOCKET PLATE
ASSEMBLY
SOCKET PLATE 2-PIN
CONNECTOR
Figure 4
ADAPTER PLATE
ASSEMBLY
SOCKET PLATE
ASSEMBLY
SCREWS (3)
Figure 5
LIGHT BULBS (2)
LIGHT
SOCKET
LIGHT
SOCKET
Figure 6A
4.
Figure 7A
Figure 7B
5.
Connect the 2-pin connector from the socket plate
assembly to 2-pin connector from motor assembly
(Figure 4).
Remove one of the three screws in the socket
plate assembly. Slightly loosen the remaining
two screws. Assemle the socket plate
assembly to the adapter plate assembly using
the two key slots. Replace the third screw and
securely tighten all three screws (Figure 5).
FROSTED
GLASS
OPAL
LOWER
STEEL
CAP ASSEMBLY
6.
Insert light bulbs into sockets (Figure 6A).
6A.
Don’t install the light bulbs if you want to install
the lower steel cap in Figure 7B (Figure 6B).
7.
Assemble the opal frosted glass to the adapter
plate assembly by twisting in a clockwise direction.
Do not over-tighten (Figure 7A)
7A.
Assemble the lower steel cap to the adapter plate
assembly by twisting in a clockwise direction.
(Figure 7B).
Figure 6B
