NOTE:
If you are uncertain of part description, refer to exploded view illustration.
1.
Check to see that you have received the following parts:
Unpacking Instructions
For your convenience, check-off boxes are provided next to each step. As each step is completed, place a check
mark in the box. This will insure that all steps have been completed and will be helpful in finding your place should
you be interrupted.
Blade Set (1)
This manual is designed to make it as easy as possible for you to assemble,
install, operate and maintain your ceiling fan
Tools Needed for Assembly
(Not included)
ne
hillips head screwdriver
One stepladder
nstalled
ire ength
ire
i e
One wire stripper
p to
ft
ft
One
lade
screwdriver
Materials
iring outlet o and o connectors ust e of type
re uired y the local code
he
ini u wire would e a
conductor
wire with ground of the following si e:
NOTE:
Place the parts from the loose parts bags in a small
container to keep them from being lost. If any parts are
missing contact your local retailer.
4
Hardware Bags
Wire Connectors (4)
Light Kit/Glass Assembly (1)
Light Kit Wire Cover (1)
Steel Cap (1)
Receiver (1)
Wire Connectors (9)
Hand-held Remote (1)
Wall Plate (1)
Screws (2)
Batteries (2)
Ceiling Bracket Assembly (1)
Motor Assembly (1)
Switch Housing Assembly (1)
Switch Housing Cover (1)
LED Assembly (1)
Before assembling your ceiling fan, refer to section
on proper method of wiring your fan (page 9). If you
feel you do not have enough wiring knowledge or
experience, have your fan installed by a licensed
electrician.
WARNING
Do not install or use fan if any part is damaged or missing. This product is designed to use only those parts
supplied with this product and/or any accessories designated specifically for use with this product by
Fanimation. Substitution of parts or accessories not designated for use with this product by Fanimation could
result in personal injury or property damage.
WARNING
1/4″-20 Pan Head Screw
With Lock Washer/Flat Washer (13)