How to Wire Your Ceiling Fan (Continued)
Listed
Outlet Box
White Wire
from Supply
Green Wire
from Supply
(Ground)
Household
Supply
Black Wire
from Supply
Black/White Wire
from Receiver
White Wire
from Receiver
Green Wire
from Hanger
Bracket (Ground)
Green Wire
from Hanger
Ball (Ground)
Green Wire
from Receiver (2)
(Ground)
Receiver
Figure 5
Listed
Outlet Box
RED
BLACK
WHITE
BLK-ANT
GRAY
YELLOW
GREEN-Ground Wire
From Hanger Bracket
GREEN-
Ground wire
From Ceiling
GREEN-Ground Wire
From Hanger Ball
GREEN / YELLOW
- Ground wire (2)
From Receiver
BLACK / WHITE
BLUE
4.
After connections have been made, put the white and green leads to one side and the black/white leads
towards the other side, upward and carefully push leads into the outlet box. The wires should be spread apart
with the grounded conductor and the equipment-grounding conductor on one side of the outlet box and the
ungrounded conductor on the other side. (Figure 5)
NOTE:
This step is applicable after the neccessary
wiring is completed.
How to Install Your Canopy Housing
Ceiling Canopy
Canopy Screw Cover
Figure 1
1.
Assemble canopy by rotating key slot in canopy
over shoulder screw in hanger bracket, taking care not
to pinch the wires. Tighten shoulder screw. Fully
assemble and tighten second shoulder screw that was
previously removed. (Figure 1)
2.
Securely attach and tighten the canopy screw cover
over the shoulder screws in the hanger bracket
utilizing the key slot twist-lock feature. (Figure 2)
WARNING
To avoid possible fire or shock, make sure that the
electrical wires are completely inside the canopy
housing and not pinched between the housing and the
ceiling.
Figure 2
11
