F&P Evora, Инструкция по использованию и уходу

Страница: 6 / 26

CLEANING YOUR MASK AT HOME
• After each use: Wash the Cushion (A) , Swivel (H) , Frame (B) and
Tube (G) .
• After 7 days use: Wash the complete Headgear (C) including the Top
Strap
(D)
and Back Strap
(E)
. It is not necessary to remove the Back
Strap (E) when cleaning the Headgear (C) .
1. Hand-wash the mask parts in soap dissolved in lukewarm water.
Do not soak for more than 10 minutes.
2. Rinse thoroughly in fresh water, ensuring that all soap residue has
been removed.
3. Inspect all parts to ensure they are visually clean. If necessary, repeat
the cleaning steps until all parts are visually clean.
4. Leave all parts to dry out of direct sunlight before reassembling.
Cleaning Cautions
• Do not clean your mask with products containing alcohol,
anti-bacterial agents, antiseptic, bleach, chlorine or moisturizer.
• Do not clean your mask in a dishwasher.
• Do not store your mask in direct sunlight.
• Do not iron the Headgear
(C) .
• Do not pull or attempt to remove the Tube
(G)
from the Frame
(B)
.
The Tube (G) is permanently connected to the Frame (B) .
The above actions may deteriorate or damage the mask and shorten
its life. If there is any visible deterioration do not use your mask and
seek replacement part(s).
ASSEMBLING YOUR MASK
1. Push the Swivel (H) onto the bottom of the Tube (G) .
2. Push the Cushion
(A)
firmly onto the Frame
(B)
to click into place.
3. Push the Headgear (C) down onto the Frame (B) behind the Exhaust
Holes (F) to click into place.
1
H G
2
A
B
C
B
3
4 ENGLISH