- 2 -
Roller blind can be stopped on the user-selected level (incomple-
te opening or closing of the roller blind).
Controller control inputs are divided into two groups: local con-
trol and central control.
����� �������
Depending on how you connect the controller, it can operate in
one or two local keys mode.
One local key
Local control input
����
is connected permanently to the N
line. Local control input
��
is connected to a key that alternate-
ly switches the roller blind to move up or down. Short press
(<0.5 s) switches on the blind for a programmed time. Pressing
the key when the roller blind is already in motion causes the roll-
er blind to stop. Long press (>0.5 s) switches on the roller blind
for as long as the key is pressed.
Each time you press the key the roller blind will move in the di-
rection opposite to the previous one.
Two local keys
Each direction of movement has its own local key. Short press
(<0.5 s) switches on the roller blind to move in a given direction
for the programmed period of time. Pressing the key when the
roller blind is already in motion causes the roller blind to stop.
Long press (>0.5 s) switches on the roller blind to move in a given
direction for as long as the key is pressed (this allows for example
to adjust the tilt of slats).
Control
