background image

- 1 -

LE-01MR

Electric energy meter, 

1-phase

MID Directive  

2014/32/EU

Certificate    

0120/SGS0305

The LE-01MR is a static (electronic) calibrated electricity meter 

of single-phase alternating current in direct system.

It is designed to indicate and register the consumed electricity 

and parame-ters of the power supply network with the option of 

remote reading of indications via RS-485 network.

The LE-01MR meter precisely measures the amount of consu-

med electricity under the influence of flowing current and ap-

plied voltage. Power consumption is indicated by the flashing 

LED (1000 pulses/kWh). In addition, the meter measures the pa-

rameters of the supply network and the temperature of its own 

system. The values are indicated cyclically on the LCD display. 

Compliance

Purpose

Functioning

F&F Filipowski sp. j.

Konstantynowska 79/81, 95-200 Pabianice, POLAND

phone/fax (+48 42) 215 23 83 / (+48 42) 227 09 71

www.fif.com.pl; e-mail: [email protected]

Do not dispose of this device in the trash along with other waste! 

According to the Law on Waste, electro coming from households free of charge and can 

give any amount to up to that end point of collec� on, as well as to store the occasion of 

the purchase of new equipment (in accordance with the principle of old-for-new, regard-

less of brand). Electro thrown in the trash or abandoned in nature, pose a threat to the 

environment and human health.

Содержание LE-01MR









Отзывы: