- 2 -
Installation of this device should be carried out by a qualified installer after re-
ading this manual. Dismantling the casing of the device will automatically void
the warranty. Before starting the assembly, make sure that the connecting
wires are not live. Conditions of storage, transport and use affect the proper
operation of the device.
Features of the module
Cooperation with remote control transmitters of the F&Wave system;
Single monostable relay - relay contact remains closed as long as a button on the
remote control or local control is pressed*;
Dedicated to integrati on with gate automati on or direct control of electric door
openers;
The ability to control from up to 32 transmitters;
Local control – the ability to directly control the relay using any momentary (bell)
button;
Group programming of transmitters - multiple transmitters can be linked to the
receiver in a single programming cycle;
Separated NO output contact with load capacity of 8 A (AC-1);
Retransmission of transmitter signals - possibility to increase the range of remote
control;
Low power consumption - low operating cost.
_________________
* Due to the nature of the transmission, the relay contact may remain closed for approx. 0.1÷0.3 seconds after
the button is released.
Содержание FW-TO1S1
Страница 3: ...3 Device description Wiring diagram...
