- 2 -
Installation of this device should be carried out by a qualified installer after re-
ading this manual. Dismantling the casing of the device will automatically void
the warranty. Before starting the assembly, make sure that the connecting
wires are not live. Conditions of storage, transport and use affect the proper
operation of the device.
Features of the module
4-button remote control transmitter powered from 230 V;
Ability of cooperating with momentary (monostable) buttons – S mode, and two-
-position (bistable) buttons – BIS mode.
Cooperation with remote control transmitters of the F&Wave system;
Ability to control any number of receivers;
ON/OFF functionality (bi-stable switch) with receivers: FW-R1P, FW-R1D, FW-R2P,
FW-R2D, FW-D1P, FW-D1D, FW-LED2P, FW-LED2D;
Raise/lower the roller blind with receivers FW-STR1P, FW-STR1D;
Dim/brighten the lighting with receivers FW-D1P, FW-D1D, FW-LED2P, FW-LED2D;
Ability to change the configuration of the S1 input to ON – always switch on the
paired receivers and/or raise the roller blind;
Ability to change the configuration of the S2 input to OFF – always switch off the
paired receivers and/or lower the roller blind;
Small enclosure size;
Screw terminals for easy installation in a ø60 flush-mounted box;
Low power consumption – low operating cost.
