F&F DRL-60-12, Руководство пользователя, Страница: 4 / 12

- 4 -
6. Attach the mounting frame to the box using screws or claws.
7. Connect the DRL-60-12 according to the selected wiring
diagram.
When selecting the cable cross-section in low-voltage
installations, it is necessary to take into account the vol-
tage drop on the cables related to the length and load
of the cable.
8. Use the dials to set the operating parameters of the detector:
detection range, level of brightness below which switching will
occur and switching time of the light.
9. Slide the detector into the box and press it onto the mounting
frame. The magnets in the detector will prevent the detector
from pulling out automatically.
The sensor is designed for the voltage supply of 12/24
V DC. Connecting the 230 V mains voltage will destroy
the device.
Description of control terminals