Fancom VLR.6, Руководство пользователя

Страница: 11 / 17

Fancom VLR.6 5. Points of attention
6
5.2 Jumper setting
The VLR.6 has four jumpers with which different settings can be made.
Table 3 shows the applications and corresponding jumper settings.
The factory setting is for fan(s) with DSR feedback.
Disconnect the power for the VLR.6 before setting the jumper(s).
Table 3: Jumper table
Jumper setting
Application
J1 J2 J3 J4
Fan without
DSR feedback Place with small fan
Ø35 and Ø 40.
(Jumper is in small bag
in lid)
preferably
10-0Vdc
V
Fan with DSR
feedback*
Do not place
preferably
10-0Vdc
V
Lighting
(incandescent /
controllable
fluorescent
Do not place
preferably
10-0Vdc
L
Heating
(period control)
Do not place
preferably**
0-10Vdc
V
* Factory setting
** Change over the red (RD) and blue (BL) wire on the manual operation connector.