Fancom ISM. 12, Руководство пользователя

Страница: 5 / 33

Gndf
2
g
Before installing and commissioning the ISM.12, read the safety instructions, provisions and conditions carefully.
This paragraph contains a number of general safety instructions. The installation of the device and remedying of any
malfunctions should be performed by a certified electrical installer according to the applicable norms. The guarantee
does not apply if this product is installed in any other way than is indicated by Fancom.
Disconnect power before installation.
Prevent electrostatic discharge (ESD) when working on the ISM.12. Ensure that the workplace is clean
and dry.
Use correct wires as shown in the connection diagrams.
Make all wiring connections and check them before applying power. Incorrect connections can cause
permanent damage.
Make sure that the ISM.12 is well and properly grounded according to the guidelines.
Never place the ISM.12 in a place where the weather has direct influence (not in the sun, not in places
where the temperature can rise sharply etc.).
Inspect the ISM.12 periodically for any damages. Notify your installation technician immediately of any
damages. A damaged ISM.12 is unsafe!
Do not use water or high pressure cleaners for lengthy periods.
It is advisable not to switch off the ISM.12. This could lead to condensation caused by cooling down.
For any questions and support, please contact the local Fancom Sales & Service Center.