Fancom IR.20-150, Руководство пользователя

Страница: 9 / 12

IR.20-150
4
4. Mounting
Observe the following points when mounting the egg counting system:
1.
Mount the egg counter in an inclined position above the conveyor using
the bracket supplied (see Fig. 1). See bracket mounting drawing.
2. The sensor is at the bottom of the egg counter. Ensure the bracket
does not cover the sensor.
3. For an optimal count the eggs must be motionless on the belt. When
stopped, the belt should not back wind.
4. When mounted on a cross conveyor, the egg counter should be
positioned where the eggs cannot move (sideways). Moving eggs
could be registered more than once.
5. Intense light, namely sunlight and fluorescent light, can influence
accuracy. Place the egg counter out of direct (sun) light, or shield it
from light.
6. Mount the IR egg counter 2,5 cm above a large egg (no double-yolk).
0,85cm
2,5cm
β
= 9°
β
Fig. 1: Mounting the egg counter above the cross conveyor (side view).