Gn
10
g
When used as a traditional terminal, the iM.60 is controlled by a signal voltage of 0-10V or 10-0V. No temperature
measurement is possible in this application.
Set slide switch R to OFF.
Set slide switch U to ON.
Set Dips 1 through 6 to ON.
The position feedback is done by means of a CPS (contactless position sensor). Dipswitch 9 should be set to ON
(Default).
•
A CPS is, in contrast to the potentiometer, not manually adjustable.
•
A limit switch set with CPS has a grey sprocket wheel in the middle.
Switch on the power only after all cables have been connected correctly.
1. Connect the iM.60 (for wiring information see the connection diagram in the appendix).
2. Turn on the electricity.
1. Check whether the iM.60 has been connected correctly.
2. Check whether the iM.60 works optimally.
