Fancom ATM80 Скачать руководство пользователя страница 8

Страница: 8 / 91

2.2

Connect the AT(M)

Before connecting, turn off the power and turn it back on only after the entire installation is ready.

If an end station controls more than one AT(M) unit (max. 3) in a parallel circuit, each AT(M) unit

must be wired directly from the end station. Do not wire from a connection box of one AT(M) unit to a

connection box of another AT(M) unit.

Make sure that the AT(M) is well and properly grounded according to the guidelines.

Keep signal and power cables as short as possible. If the length of the cable is longer than 40m, the

0V wire of the 24Vac power supply has to be connected double. Do this for all AT(M) units which are

connected to the same end station. The cable length may never exceed 100m.

The voltage and frequency data on the actuator identification plate must correspond to the power

supply.

Place cables preferably in a duct (separate signal cables from power supply cables).

Use low current cables for the electrical connection of the AT(M).

Connect the AT(M). Use the:

●

Technical specifications (see (p. 5)).

The voltage and frequency data on the actuator identification plate must correspond to the power

supply.

●

Connection diagram (see (p. 6)).

AT Control damper

Supply voltage

18-24Vac + 10% (ATM 35-56)
24Vac + 10% (ATM 63-80)

Power consumption

Max. current

200mA

Control signal

10-0Vdc

Running time 90° angular rotation

22 sec. (ATM 35-56)
49 sec. (ATM 63-80)

Normal condition at delivery

0Vdc open, 8.5Vdc almost closed

Possibility to adjust the position at maximum control voltage
Transformer

max. 16 actuators on 100VA transformer

PFB (Power Fail Box)

max. 16 actuators on PFB

Содержание ATM80




























































































Результаты поиска

Содержание ATM80

Отзывы:

Похожие инструкции для ATM80

Бренды по названию

Популярные бренды

Fancom ATM80, Руководство пользователя

Результаты поиска

Содержание ATM80

Отзывы:

Похожие инструкции для ATM80

Бренды по названию

Популярные бренды