PAGE 3
3.0 INSTALLATION AND ASSEMBLY
1. Loosen the Rear guard locking screws (6) from the Motor (11), Place the Rear Guard (7) over the Motor shaft
(8). Fit holes in the Rear guard (7) over the four screw holes on the Motor (11). Secure the Rear guard (7) by
screwing the four Rear guard locking screws (6).
2. Place the Blade (5) onto the Motor Shaft (8) and fasten it by screwing the Blade locking screws (5).
3. Place the Outer ring (3) along the rim of the Rear guard (7), but DON’T tighten or lock the screw on the Outer
ring (3) yet.
4. Slide the Front Guard (2) into the Outer ring (3) and align with the Rear Guard (7). Fasten the guards together
by locking the screw on the Outer ring (3).
5. Mount the hanging bracket (12) on the wall with screws provided in the accessory pack.
6. Hang the Motor (11) with bracket onto the Hanging bracket (12).
7. Attach the Digital control panel (14) to the desired place.
