Fanco Luna 200, Руководство по установке, Страница: 2 / 8

2
Before installing your new Fanco Luna/Metro Exhaust Fan, it is important that you read and follow these
instructions prior to installation; even if you feel you are quite familiar with this type of product. Please keep this
document handy for future reference as it contains servicing and maintenance requirements.
WARNING:
•
This product is intended for DIY fitting into installations where suitable switched power outlets are already
installed. All new installations or modifications to fixed wiring must be conducted by a Licenced Electrical
Contractor (in accordance to AS/NZS3000) and only after careful review of the present user’s manual.
• Disconnect the fan from power mains prior to any connection, servicing and repair operations.
• The fan weight is 3kg. The structure that the centrifugal fan is mounted to must be capable of supporting a
weight of at least 20kg. The fixing must be able to support the moving weight of the fan and must not twist
or become loose.
• If the supply cord is damaged, it must be replaced by the manufacturer or qualified persons in order to avoid
a hazard.
• The single-phase power mains must comply with the acting local electrical norms and standards.
•
The fixed electrical wiring must be equipped with an automatic circuit breaker. The fan must be connected
to mains power through an automatic circuit breaker (QF Integrated - as per wiring diagram below) into the
fixed wiring system, with the gap between the breaker contacts on all poles no less than 3mm.
• Check the fan for any visible damages of the impeller and the casing before starting installation.
• The casing internals must be free of any foreign objects which can damage the impeller blades.
• Misuse of the device or any unauthorised modification is not allowed.
• The fan is not to be used by children and persons with reduced physical, mental or sensory capacities,
without proper practical experience or expertise, unless they are controlled or instructed on the product
operation by the person(s) responsible for their safety.
•
Do not leave children unattended and do not let them play with the product.
•
Take steps to prevent ingress of smoke, carbon monoxide and other combustion products into the room
through open chimney flues or other fire-protection devices. Sufficient air supply must be provided for
proper combustion and exhaust of gases through the chimney of fuel burning equipment to prevent back
drafting.
• Transporting medium must not contain any dust or other solid impurities, sticky substances or fibrous
materials.
• DO NOT use the fan in the environment containing hazardous or explosive materials and vapours, i.e.,
spirits, gasoline, insecticides, etc.
• DO NOT close or block the fan intake or extract vents in order to ensure the most effective air passage.
•
DO NOT sit on the fan and do not put objects on the fan.
•
Fulfil the requirements stated in this user's manual to ensure long service life of the product.
•
The Luna/Metro exhaust fan described in this user’s manual is designed for exhaust ventilation of small to
medium-sized premises.
RECYCLE AT THE END OF THE SERVICE LIFE.
DO NOT DISPOSE THE PRODUCT WITH UNSORTED MUNICIPAL TRASH.