Fanco CFFCHZ3BRR, Руководство по установке

Страница: 8 / 16

6. If being installed without light – insert cover by placing under motor and twisting gently to lock into place.
Ensure the power is off when installing this fan.
For your convenience, and to assist in easy installation & cleaning, your ceiling fan is connected with Fanco’s
easy connect system. Simply connect the male and female couplings, and then ensure excess wiring is re-
tained inside the upper canopy.
Connect the Live (L), Neutral (N) and Earth ( ) according to the markings on the Terminal Block.
7. Light Installation
7.1. Connect LED driver plug to light wire plug.
7.2. Fit LED driver and LED panel to base of the light, using magnet system to secure.
7.3. Fit light diffuser by placing under motor and twisting gently to lock into place.
8. Wall Control Installation
8.1. The Wall control must be hard wired for electricity supply (no batteries required) and must be
fixed to the wall with no access to wiring for safety.
8.2. Connect the wiring from the mains supply to the relevant points as shown on the back of the wall
control; see image below.
Connect the Live (L), Neutral (N) and Earth ( ) according to the markings on the Terminal Block.
9. Pair Remote or Wall control Transmitter to begin using your fan – see below for Pairing instructions.
6 8.2
INSTALLATION STEPS
ELECTRICAL CONNECTIONS
AC IN
Antenna wire
Black wire
Blue
White
Brown (Pink) Black Wire
White Wire
Grey
Red
Antenna wire
Black wire