REVERSE FUNCTION:
The “Summer / Winter” reverse function is included in the remote control to make the fan rotate in an
anti-clockwise direction during summer. In winter, this can be reversed, so that the blades now move in a
clockwise direction.
CARE & CLEANING:
•
Periodic cleaning of your ceiling fan is the only maintenance required.
•
Use a soft brush or lint free cloth to avoid scratching the finish. Please turn off electricity when you do
so.
•
Do not use water when cleaning your ceiling fan. It could damage the motor or the wooden blades
and create the possibility of an electrical shock.
•
The motor has a permanently lubricated ball bearing and as such, is maintenance free.
NOISE:
The manufacturer warranty covers actual faults that may develop, but NOT minor complaints, e.g. motor
operation noise - ALL ELECTRIC MOTORS ARE AUDIBLE TO SOME EXTENT; this is more obvious
when the fan is operating at low speeds.
WOBBLE:
•
Ceiling fans are designed to move during operation because they are not generally rigidly mounted
•
Movement of a couple of centimetres is acceptable for safe operation.
•
Balancing kits included should be used to adjust the balancing when first installed.
NORMAL WEAR AND TEAR:
Threaded components working slighting loose or blade carriers even slightly bent due to vigorous
cleaning or bumping can cause extra wobble and noise. THIS IS NOT COVERED UNDER WARRANTY
but a little care and maintenance can reduce or prevent this problem.
REMOTE CONTROL SETTING AND OPERATION FOR DC FANS
NOTE
: The Hand Held Remote Control System is equipped with a learning frequency function which
has code combinations to prevent potential interference from other remote units. The
frequency on your Receiver and Transmitter units have been preset at the factory. If the remotes need
programming please following these instructions and use a small size tool to change the code switch
setting for each remote.