1.Read these prescripts.
2.Keep this user manual.
3.Pay attention to all the notice.
4.Comply with these prescripts.
6.Wiped by dry cloth.
7.Do not block the openings. Install according to the manufacturer's instructions.
8.Please don't close to the heat when installation,such as radiator,furnace and other heating device.
9.Don't make a grounding plug security failure, the equipment should be grounded through a protective connected to a socket.
10.Prevent the wire to being trampled or extrusion, with particular attention to the plug, socket and connecting device.
5.Warning:To avoid causing fire or hit by the thunder,don't put the equipment in the rain or in the wet environment.
Important information in this manual
Be careful of electric shock
unqualified personnel are forbidden to open for repair.
，
11.Turn off the power amplifier before unplug the power line, the signal line or a touch input mode selection switch,
limiter disconnection.
13.Signal distributor is advised to be used when the input signal paralleled with more than 3 amplifiers,
to ensure the input signal without distortion.
14.Don't connect the output interface of one channel to the input interface of another channel in the
power amplifier. Don't connect one power amplifier to another one by connecting their output in series
or parallel connection.
15.Match with the power amplifier, the power of the power amplifier should be 50%-100% more
than the loudspeaker power.
16.
17.Please use the sequence power for multi amplifier used in the same time.
When maintenance, don't connect the probe of the oscilloscope to the output interface under
bridge in case of damaging the power amplifier and the oscilloscope.
12.Must be used with a nominal supply voltage,the service will be paid if the damage caused by the wrong power voltage.
Important instructions and safety information
P2
Masx series power amplifier
MAsx
