G
o
-C
a
rt
:
P
ie
c
e
A
s
s
e
m
b
ly
FamilyFun.com
©FamilyFun
FIGURE
15
Attach the remaining plywood parts to the frame with
1
X
-inch drywall screws. Start with the
seat back
, lin-
ing up the bottom edge with the bottom of the rear
axle,
and screw into both the axle and the
axle blocks
.
Next, set the
seat
on the frame, butting it up against
the seat back, and screw it to the axle blocks and the
center support.
Position the
steering column assembly
on top of the
center support, butting it up against the seat. Fasten
it in place by screwing through the plywood into the
center support on both sides.
FIGURE
16
Attach the
steering bar
to the top of the steering col-
umn with a
W
- by 3
K
-inch bolt
, sandwiching
W
-inch
washers
between all pieces. Thread a
W
-inch lock nut
onto the end of the bolt and tighten it until it’s snug
but still allows the bar to pivot.
Photographs by
Kevin Ayer
10
FIGURE
15
FIGURE
16
