11
12
[Adjusting P
osition]
[Bef
ore Using]
Wheels
Back Pad
Chair Covering
Reclining
Seat Back
Before Using
Lift up the back pad as shown in the diagram to make sure that there are
no holes or tears in the chair covering beneath it.
Checking Seat Cover
l
Always check to be sure there are no holes or tears in
the seat covering by lifting up the back pad to check the
seatback beneath it. Also, check for other parts. Stop
using the chair immediately if you find even the
smallest tear. Unplug the chair and contact the store
where you purchased the chair for assistance.
Warning
How To Move The Chair
The chair is equipped with wheels to make it easier to move. First
raise the reclining seat back and turn the main POWER switch to
OFF. Then unplug the chair and lift the front of the chair as
shown in the diagram and wheel it to the desired position.
l
Do not move the chair while someone is on it.
l
Be careful not to catch feet in between when mov-
ing the chair.
Caution
Make sure the footrest is down. When the chair is off, the rollers are normally drawn back into the left and
right sides of the upper part of the seat back (Storage Position). For safety reasons, first check the position of
the rollers. If they are in any position other than storage position, turn the POWER switch on before sitting
down to allow the rollers to return to storage position. Then sit down slowly with your back centered in the
seat back.
How To Use The Footrest
n
To raise the footrest:
Push and hold the UP button under FOOTREST.
Release when you reach the desired angle to fix foot rest position.
n
To lower the footrest:
Push and hold the DOWN button under FOOTREST.
Release when you reach the desired angle to fix footrest position.
How To Sit
How To Use The Reclining Seat Back
l
Do not sit down in the chair with the footrest raised. Any sudden heavy weight on the footrest could cause
damage to the mechanism.
l
The footrest activates whenever the reclining function is used.
When the chair stops reclining, the footrest also stops moving. Then the foot slide function automatically ex-
tends or shortens the footrest to match the length of your legs.
l
Foot slide automatic adjustment function becomes available when you release Reclining Button.
l
After the foot slide stops, you can further adjust the footrest position using the Foot Slide buttons.
l
If the main POWER switch at the back of chair is [ON], you can adjust the reclining position.
l
When the footrest stops, the foot slide function automatically slides the footrest in or out to match the length
of your legs.
l
After the foot slide stops, you can further adjust the footrest position using the Foot Slide buttons.
l
If the main POWER switch at the back of chair is [ON], you can adjust the footrest angle.
*If your ankles do not seem to be touching the wall of the Foot Unit, adjust the reclining position or the footrest position until the footrest
fits firmly around the legs and feet.
l
Before using, raise the reclining seat back to its fully upright position. Then recline the seat back
slowly to the most comfortable position, remembering to start off with a lighter massage.
Caution
l
Be sure no one, especially children or pets, is in the way when lowering the footrest.
Be careful not to catch people or objects under the footrest.
l
Be careful not to get hands caught when raising the footrest by hand.
l
Do not place anything other than the legs and feet on the footrest.
Warning
Caution
n
To raise the reclining seat back:
Push and hold the UP button under RECLINING.
Release when you reach the desired position.
The seat up will end up with upright position if this button is kept pressed.
n
To lower the reclining seat back:
Push and hold the DOWN button under RECLINING.
Release when you reach the desired position.
The seat up will end up with horizontal position if this button is kept pressed.
Adjusting Position
l
Be sure no one, especially children or pets, is in the way when lowering the reclining seat
back. Be careful not to catch people or objects behind the seat back.
Warning
