Attaching tablet/tablet stand
6
The tablet stand allows for the angle to be adjusted. However, do not move the tablet stand beyond the movable
range or apply an excessive force. Otherwise, the tablet stand may fail.
Connecting tablet/tablet stand
Before attaching the tablet, confirm that the main power switch is turned “OFF,” and then disconnect the power
cable the receptacle and also disconnect the connector of the power cable from the inlet.
During work, securely hold the tablet so as not to drop it on the floor.
Connect the connector on the tablet stand (C in figure
above) to the connector on the left side of the main ma-
chine. Align the claw direction with the counterpart and
securely insert the connector.
●
❶
Insert the protrusions of the tablet stand connector to
the three holes on the connector on the main machine
(A, B, and D on the figure above), and then turn the con-
nected part counterclockwise while depressing the
Unlock button until the clicking sound is heard.
Once the clicking sound is heard, the lock has been
engaged and the connectors have been fixed with each
other.
●
❷
A
A
B
B
D
D
C
C
➡