Dismounting side panels
5
Check the positions of the six claws
on the side panel that is bundled in
the package, and attach it on the
arm rest while confirming the click-
ing sound.
❽
Follow the same steps for the opposite side.
(Although the figure illustrates the right side,
also work in the same way for the left side.)
CAUTION
Positions of
claws at the back
Insert a flat-blade screwdriver into
clearances from the side panel.
To the recesses at these locations,
insert a flat-blade screwdriver
from the hole from the back.
Rear face of right side panel
To dismount the side panel and arm rest, follow the above steps in the reverse order.
Claw on side panel
Side panel
Claw on arm rest
Right arm rest
●
Side panel
←
Recess for insertion
(clearance)
Insert a thin
flat-blade screwdriver.
●
When dismounting a side panel, insert a thin flat-blade screwdriver or the like that you possess into the recesses for
insertion (clearances) between the side panel and the arm rest, depress the claw, and pull the side panel toward you
to dismount it.
Do not forcefully remove the side panel because any attempt to do so may cause the side panel to be broken or you
to get injured.
By disengaging the claws in order from the one at the back of the chair body, it is possible to smoothly dismount the
side panel.
●
Before dismounting and mounting the arm rests, confirm that the main power switch is turned “OFF,” and
then disconnect the power cable from the receptacle, and also disconnect the connector of the power
cable from the inlet.
→
Failure to follow this instruction may damage the power cable, possibly causing fire or electric shock.
●
When dismounting and mounting the arm rests, pay attention not to have your hand or finger pinched
between the
main machine and arm rest.
●
During mounting work, positively insert the connector all the way to the back. Securely tighten the mounting
screws as well.
→
Failure to follow this instruction may cause a failure.
●
As the product is heavy, wear work gloves so as not to get injured.
●
Although the figure illustrates the right side, also work in the same way for the left side.
●
To dismount the side panel and arm rest, follow the above steps in the reverse order.
