Fametech POS-8017F Series Скачать руководство пользователя

Страница: 3 / 113

CAUTION

The system is provided with a battery-powered Real-Time Clock circuit. There is a danger of

exposing and personal injury if the battery is incorrectly replaced or mistreated. Do not attempt to

disassemble the battery, immerse it in the water or expose it to fire.

WARRANTY LIMITS

If the product and the parts are disassembled by any person other than the authorized

technicians, the warranty will be terminated. The users should consult his/her dealer for any

technical problems. Warranty does not cover any damage caused by improper use.

TRADE MARKS AND SERVICE MARKS

TYSSO is a registered trademark of FAMETECH INC.

Other brand and product names are trademarks and registered trademarks and service marks of

their respective owners.

Содержание POS-8017F Series


















































































































Результаты поиска

Содержание POS-8017F Series

Отзывы:

Похожие инструкции для POS-8017F Series

Бренды по названию

Популярные бренды

Fametech POS-8017F Series, Руководство пользователя

Результаты поиска

Содержание POS-8017F Series

Отзывы:

Похожие инструкции для POS-8017F Series

Бренды по названию

Популярные бренды