background image

20

 SAFETY INSTRUCTIONS

 AND WARNINGS

Installation operations are to be carried 

out by skilled and qualified installers in ac-

cordance with the instructions in this booklet and 

in compliance with the regulations in force. DO 

NOT use the hood if the power supply cable or 

other components are damaged: 

disconnect the 

hood from the electrical power supply and contact 

the Dealer or an authorised Servicing Dealer for re-

pairs. 

Do not modify the electrical, mechanical or func-

tional structure of the equipment.
Do not personally try to carry out repairs or 

replacements. Interventions carried out by 

incompetent and unauthorised persons can 

cause serious damage to the unit or physical and 

personal harm, not covered by the Manufacturer's 

warranty.

WARNINGS FOR THE INSTALLER

TECHNICAL SAFETY

Before installing the hood, check the integ-

rity and function of each part. Should 

anomalies be noted, do not proceed with installa-

tion and contact the Dealer.

Do NOT install the hood if an aesthetic (or cos-

metic) defect has been detected. Put it back into 

its original package and contact the dealer.
No claim can be made for aesthetic (or cosmetic) 

defects once it has been installed.

During installation, always use personal protective 

equipment (e.g.: Safety shoes) and adopt prudent 

and proper conduct.
The installation kit (screws and plugs) supplied with 

the hood is only to be used on masonry walls: in case 

of installation on walls of a different material, assess 

other installation options keeping in mind the type of 

wall surface and the weight of the hood (indicated on 

spec sheets at the beginning of this manual).
Keep in mind that installations with different types of 

fastening systems from those supplied, or which are 

not compliant, can cause electrical and mechanical 

seal danger.
Do not install the hood outdoors and do not expose 

it to atmospheric elements (rain, wind, etc.).

ELECTRICAL SAFETY

The electrical system to which the hood is 

to be connected must be in accordance 

with local standards and supplied with earthed 

connection in compliance with safety regulations 

in the country of use. It must also comply with lo-

cal standards regarding radio antistatic proper-

ties. 

Before installing the hood, check that the electrical 

mains power supply corresponds with what is report-

ed on the identification plate located inside the hood.

The socket used to connect the installed equipment 

to the electrical power supply must be within reach: 

otherwise, install a mains switch to disconnect the 

hood when required.

Any changes to the electrical system must be carried 

out by a qualified electrician. 

The maximum length of the flue fastening screws 

(supplied by the manufacturer) must be 1/2" (13 mm). 

Use of non-compliant screws with these instructions 

can lead to danger of an electrical nature.

Do not try to solve the problem yourself in the event 

of equipment malfunction, but contact the Dealer or 

an authorised Servicing Department for repairs.

When installing the hood, disconnect the 

equipment by removing the plug or switch-

ing off the main switch.

FUMES DISCHARGE SAFETY

Do no connect the equipment to discharge 

pipes of fumes produced from combustion 

(for example boilers, fireplaces, etc.).

Before installing the hood, ensure that all standards in 

force regarding discharge of air out of the room have 

been complied with.

USER WARNINGS

These warnings have been drawn up for 

your personal safety and those of others. 

You are therefore kindly asked to read the book-

let carefully in its entirety before using the or 

cleaning the equipment.
The Manufacturer declines all responsibility for 

any damage caused directly, or indirectly, to per-

sons, things and pets as a consequence of failing 

to comply with the safety warnings indicated in 

this booklet.
It is imperative that this instructions booklet is 

kept together with the equipment for any future 

consultation.

If the equipment is sold or transferred to another per-

son, make sure that the booklet is also supplied so 

that the new user can be made aware of the hood's 

operation and relative warnings. 

Содержание FP18P30W6SS





































Отзывы: