3
Product Listing
This instruction manual pertains to the use and operation of the products listed below. Should
you have any questions about the product that you have purchased, please contact FallTech for
additional details.
D-Ring Extenders:
Model # Description
Model #
Description
7202
14” D-Ring Extender (Hook + D-ring)
8202
14” D-Ring Extender (Hook + D-ring)
7366
18” D-Ring Extender (Hook + D-ring)
8366
18” D-Ring Extender (Hook + D-ring)
736616
16” D-Ring Extender (Hook + D-ring)
836616
16” D-Ring Extender (Hook + D-ring)
736624
24” D-Ring Extender (Hook + D-ring)
836624
24” D-Ring Extender (Hook + D-ring)
7366TD
16” Twin D-Ring Extender (Hook + 2 D-rings)
8366TD
16” Twin D-Ring Extender (Hook + 2 D-rings)
7366L
18” D-Ring Extender (Loop + D-ring)
8366L
18” D-Ring Extender (Loop + D-ring)
73662D
14” D-Ring Extender (Hook +2 D-rings)
83662D
14” D-Ring Extender (Hook +2 D-rings)
73663
18” D-ring Extender (Rebar hook + D-ring)
83663
18” D-ring Extender (Rebar hook + D-ring)
Section 1: Warnings and Advisories
This product is to be used as a part of a personal fall arrest system, and should be used
only with compatible components. Please see Advisory #3 in this section for further
details. Failure to use compatible components can result in a failure of the system to
perform as intended, which may result in serious injury or death.
Throughout the OSHA regulations for safety and health, there are references to Competent
Persons and Qualified Persons. ANSI Z359.0-2007 goes on to further define the roles and
qualifications of these individuals; as well as Authorized Persons, and their importance in
the workplace. These terms are also used in these instructions. Below is a brief
description of the part these individuals play in the employment of fall protection
equipment:
Authorized Person - a person who is exposed to fall hazards during the course of their
work. This individual requires formal training in the use of personal fall protection
equipment and systems. The term Authorized Person may be used interchangeably with
User and End-User.
Competent Person – a trained and experienced person who is designated to supervise,
implement and monitor an employer’s managed fall protection program. This individual is
capable of identifying and addressing fall hazards and is authorized to make decisions
and take corrective action in the workplace.
Qualified Person – a person possessing a degree or professional certificate and having
extensive training, knowledge and experience with fall protection and who is capable of
designing and specifying fall protection equipment and systems to address fall hazards.
Please read these instructions and be sure that you understand them prior to utilizing this
equipment. Also be sure to read the instructions included with other components which
are being utilized in your Personal Fall Arrest System (Harnesses, connectors, anchorage
connectors, etc.). Failure to understand and comply with manufacturer’s instructions may
result in serious injury or death. IF YOU DO NOT UNDERSTAND ANY PART OF THESE
INSTRUCTIONS, PLEASE HAVE THEM EXPLAINED TO YOU BY A COMPETENT PERSON.
