Top Arm Lengths
MIN
MAX
55.5”
81.5”
Lower Leg Lengths
MIN
MAX
33.5”
51.5”
Top Arm to Lower Leg Angles
MIN
MID
MAX
0
o
45
o
90
o
4.1.4
Remove the Top Arm detent pin to adjust the length of
the arm. Based on which detent pin hole is used, there is a 6”
adjustment in which the arm can be lengthened.
4.1.5
Remove the Lower Leg detent pin to adjust the Lower Leg
length.
4.1.6
Remove the detent pin to adjust the angle of the Top Arm
to the Lower Leg, see Figure 8. The arm can be adjusted to
three different angles: 0, 45, and 90 degrees.
4.2 Device Installation
4.2.1
To attach a winch or SRL-R to the Device Receiver Bracket,
place the notch in the device side bracket over the bottom bar
of the bracket as shown in Figure 9 and 10. Rotate to align the
upper holes on the bracket, see Figure 11 and insert the
provided detent pin, see Figure 12.
Figure 8 - Length and Angle Adjustment
Figure 9 - Attaching Device
Figure 10 - Attaching Device
Figure 11 - Attaching Device
Figure 12 - Device Attached
011819
MCS41 Rev A
6
