07
08
4.
Click on
[Add cameras via WiFi
configuration guide]
.
3.
Open the Faleemi App,
click on
[Add Camera]
.
5.
Please scan the QR Code at the bottom of
the camera.
QR Code
If you see this, please click on
If you see this, please click on
[OK]
If you can’t scan the QRcode,
If you can’t scan the QRcode,
please Click on
please Click on
[Skip]
Setup Option B
Setup Option B
Setup Option B: Add cameras via WiFi configuration guide
1.
Please
put your camera close to your
WiFi router
and plug it in, you will hear
“Beep”
. The camera is initializing by
rotating from left to right and up to down
and stop in center finally. And then you
will see the red light is blinking slowly.
Note: when the camera is startup, it will
Note: when the camera is startup, it will
sound one
sound one
“Beep”
Note: The reset button is small, not easy to
Note: The reset button is small, not easy to
hold it down, please make sure you feel
hold it down, please make sure you feel
that it is pressed down.
that it is pressed down.
Press down
Set Button
3~5s
Blink Light
2.
Please press down the
Set Button
for
about 3 seconds until you see the LED light is
blinking blue and then let it go.
NOTE
CAUTION: Holding for longer than 10
CAUTION: Holding for longer than 10
seconds will reset the camera (when you
seconds will reset the camera (when you
see the LED is blinking red fast).
see the LED is blinking red fast).
Note: If you already use the Faleemi app, make sure that you are using the latest version.
To find the updates, please go to the App store (ios) or Google Play (Android) and search for Faleemi.
Model: FSC776B/W
Quick Start Guide
HD Pan/Tilt Wireless Network Camera
