7.
Remove the four screws securing the left side of the upper and lower battery hold-
down brackets to the lower chassis.
8.
Gently lift the battery hold down bracket and rotate it off of the batteries. Use care
not to pull the remaining wiring connected to the battery hold down bracket.
9.
Remove the red wire (+15), battery fast-on terminal from the + (red) side of BATT1
as shown.
10.
Remove the black wire (-15), battery fast-on terminal from the - (black) side of
BATT6 as shown.
11.
Remove the black jumper from BATT1 - (black) and BATT2 + (red).
12.
Remove the black jumper from BATT2 - (black) and BATT3 + (red).
13.
Remove the black jumper from BATT3 - (black) and BATT4 + (red).
14
Remove the black jumper from BATT4 - (black) and BATT5 + (red).
15.
Remove the black jumper from BATT5 - (black) and BATT6 + (red).
16.
Note the position of the six batteries and remove them from the chassis. See the
battery connection diagram below.
WHEN REMOVING AND INSTALLING THE NEW BATTERIES, EXTREME CARE MUST
BE USED NOT TO SHORT METAL CHASSIS PARTS ACROSS THE BATTERY
TERMINALS AND NOT TO SHORT THE BATTERIES TO EACH OTHER OR
PERSONAL INJURY MAY RESULT.
17.
Reinstall six new batteries in the same placement as the six just removed.
Loosen 2 screws
securing upper hold
down bracket
Remove 2 screws
securing upper hold
down bracket
4
Remove 2 screws
securing lower hold
down bracket
Loosen 2 screws
securing upper hold
down bracket
Red wire (+15) fast-on
terminal.
BATT 1
BATT 2
BATT 3
BATT 4
BATT 5
BATT 6
CAUTION
