UPS OUTLET CONTROL (outlets 1 & 2 only)
Follow the instructions in the Sensaphone X10 manual for details concerning the
remote and local control of this function.
Should you want to test this output control function while the UPS is operating do
the following:
TO TURN ON THE UPS OUTLETS 1 & 2
Depress the
STATUS followed by the #6 button
on the Sensaphone, The
UPS outlets should turn on.
TO TURN OFF THE UPS OUTLETS 1 & 2
Depress the
STATUS followed by the #3 button
on the Sensaphone. The
UPS outlets should turn off.
You can also dial into the Sensaphone and verify the outlet control. Refer to the
Sensaphone X10 and user’s manual for detailed instructions.
1
5
6
9
CN1
Rear View
DB- 9M
PE56524
White
Blue
Brown
Orange
Green
Yellow
CN2
Rear View
DB-9F
PE56501
1
5
6
9
Gray
Violet
Red #6 Ring Lug
6 places
PE57507
Note: Cut off all unused conductors in cable
12 Conductor Cable
Type CMR or CL2R
26 Awg, stranded
Shrink Tube
in separate
cable
Shrink Tube
in separate
cable
SENSAPHONE INTERFACE CABLE
CA080338
GND2
2 -Uty. Loss
GND3
3 - Low Batt.
GND4
4 - Bypass/Alm
GND5
5 - Output SD
Use DB-9 Back Shell PE655365
(2) places (mouser 152-1309
INTERFACE CABLE