Falcon Rotagang F210 TurfPro, Руководство оператора

Страница: 22 / 38

speed and conduct visual checks for excessive
vibration. bedryfspoed en kyk om seker te maak dat daar geen
oormatige vibrasie is nie.
-
Causes of excessive vibration must be identified and
eliminated immediately to prevent consequential
structural or mechanical failure not covered under
warranty.
-
Oorsake van oormatige vibrasie moet vasgestel en
onmiddellik uitgeskakel word om gevolglike strukturele
of meganiese skade wat nie deur die waarborg gedek
word nie, te verhoed.
Table / Tabel 1
Bolt Torque Specifications (N.m) / Boutwringkragspesifikasies (N.m)
Class/Klas 4.6 8.8 10.9 12.9
Lubrication/
Smering
Wet/Nat Dry/Droog Wet/Nat Dry/Droog Wet/Nat Dry/Droog Wet/Nat Dry/Droog
M6 4.8 6.0 9.0 11.0 13.0 17.0 15.0 19.0
M8 12.0 15.0 22.0 28.0 32.0 40.0 37.0 47.0
M10 23.0 29.0 43.0 55.0 63.0 80.0 75.0 95.0
M12 40.0 50.0 75.0 95.0 110.0 140.0 130.0 165.0
M14 63.0 80.0 120.0 150.0 175.0 225.0 205.0 260.0
M16 100.0 125.0 190.0 240.0 275.0 350.0 320.0 400.0
M18 135.0 175.0 260.0 330.0 375.0 475.0 440.0 560.0
M20 190.0 240.0 375.0 475.0 530.0 675.0 625.0 800.0
M22 260.0 330.0 510.0 650.0 725.0 925.0 850.0 1075.0
M24 330.0 425.0 650.0 825.0 925.0 1150.0 1075.0 1350.0
M27 490.0 625.0 950.0 1200.0 1350.0 1700.0 1600.0 2000.0
M30 675.0 850.0 1300.0 1650.0 1850.0 2300.0 2150.0 2700.0
M33 800.0 1150.0 1750.0 2200.0 2500.0 3150.0 2900.0 3700.0
M36 1150.0 1450.0 2250.0 2850.0 3200.0 4050.0 3750.0 4750.0
Table / Tabel 2
Lubrication Requirements / Smeringsvereistes
Application Type Process Interval Products
Gearboxes
Bevel gearboxes Oiled
Replace 12M
Gear oil, Fuchs, Renep1000
Check 1D
Splitter gearboxes Oiled
Replace 12M
Check 1D
PTO drive shafts
UV-joints Greased Refresh 10H
Grease, Universal, Moly #2
CV-joints Greased Refresh 10H
Telescopic tubes Greased Refresh 20H
Auxiliary drives
Intermediate shafts Greased Refresh 10H
Spindles Greased
Replace 12M
Grease, Fuchs, HT Lithium M2
Refresh 10H
Bearing housings Greased
Replace 3M
Refresh 10H
Bearing units Greased Refresh 20H
Grease, Universal, Moly #2 Wheels Wheel bearings Greased Refresh 1W
Pivot points
Pins and bushes
Greased Refresh 10H
Oiled Refresh 10H Machine oil, Universal
Ball joints
Greased Refresh 10H Grease, Universal, Moly #2
Oiled Refresh 10H Machine oil, Universal
Adjusters / Levers
Threaded rods /
Leadscrews
Greased Refresh 20H Grease, Universal, Moly #2
Oiled Refresh 20H Machine oil, Universal
20