Falcon PREDATOR EVO3 Скачать руководство пользователя страница 6

 

6

alarm, the doors will lock and the siren will chirp once and the indicator lights flash 
once to confirm the arm status.  The LED will turn on and flash slowly after 2 
seconds. 

 

7.2>

 If a door, the bonnet or boot were not closed properly when the system was 

armed the siren will chirp and the indicator lights flash three times, the doors will 
lock and the lights will flash once again and the siren will sound a long chirp and 
a short chirp to warn you. 
 

8) Disarm/Override   
8.1>

 With the alarm armed pressing button #1 will disarm the system, the doors 

will unlock and the siren will chirp twice and the indicator lights will flash twice to 
confirm. The LED will turn off. 

 

8.2>

 Override – to disarm the system without a remote control (eg. In case of flat 

battery/lost remote), open the door and the alarm will sound, switch the ignition 
on and off 4 times to disarm (

on-off-on-off-on-off-on-off). 

 

8.3>

 The lights will keep on flashing until door or bonnet/boot is closed while the 

ignition is on, if doors, hood or trunk is opened. 
 

9) Alarm Mode 

9.1>

 If any installed sensors are triggered the system will enter alarm mode and the 

siren will sound and indicators flash unless the alarm is triggered by the first stage 
of the shock sensor in which case the siren will chirp 3 times only to warn intruders. 

 

9.2>

 If the ignition is triggered (ACC is turned to “on” position), the system will 

enter the alarm mode until the ignition is turned off.

  

 

9.3>

 If doors, bonnet or boot are opened the siren will sound and stop after 30 or 

60 seconds as pre setting of option 5 even if the door, bonnet or boot is still open 
unless option 5 set at ‘continuous’ in which case the siren will sound until the door, 
bonnet or boot is closed. 

 

9.4>

 If the alarm is triggered, press button #1 once, the siren will chirp once, the 

doors will lock (if unlocked) and the system remains in the arm mode. 
 

10) Panic 

Under any mode, press button #1 for 2 seconds, the system will enter into the arm 
mode. The indicator lights will flash and siren sounds. 
 

11) Mute Arm mode 

11.1>

 With the alarm disarmed press button #1+#2 once, the lights will flash once, 

then press button #1 again within 1 second and the system will enter into the arm 
mode; the lights will flash once more to confirm and the doors will lock. 

 

11.2>

 under the mute mode: if shock sensors are triggered, only the lights will flash. 

If the ignition, doors or bonnet/boor are triggered the siren will sound and lights 
flash and mute mode will be cancelled. 
 

12) Valet Mode 

Содержание PREDATOR EVO3









Отзывы: